TROUBLESHOOTING
For Classic, Plus and miniMAX models insert a new battery in the timer, not a used battery from another gadget, preferably an Energizer or Duracell. If a new battery does not resolve the issue, REBOOT the timer, by using a pen to push the reboot button on the side of the timer.
For Charge models fully charge the timer then perform the above REBOOT.
If this does not resolve your problem, please review the Return/Replacement Procedure on the RETURNS page.
CLASSIC, PLUS AND CHARGE MODEL SETUP
IMPORTANT – PLEASE READ
The Charge model operates the exact same way as the Classic and Plus models as far as setup and operation. You can view the video and expanded instructions below and apply it to the Charge model. The only operational difference is that the Charge model has a built in rechargeable lithium battery that cannot be removed or replaced. So when following the instructions below, ignore the part where it say to replace the AAA battery with a brand new one before rebooting. With the Charge model, simply charge the timer first and then attempt a reboot by using a pen to push the REBOOT hole on the side of the timer.
Never remove the back of any model of timer by using a screwdriver to remove the screws. There will never be any reason to do that. Doing so will void the warranty.
EXPANDED INSTRUCTIONS PDF
- ENGLISH INSTRUCTIONS
- DEUTSCHE ANLEITUNG
- ISTRUZIONI ITALIANO
- INSTRUCCIONES EN ESPAÑOL
- INSTRUCTIONS EN FRANÇAIS
- NEDERLANDSE INSTRUCTIES
- POOLSE INSTRUCTIES
- ZWEEDSE INSTRUCTIES
MINIMAX MODEL SETUP
EXPANDED INSTRUCTIONS PDF
- ENGLISH INSTRUCTIONS
- DEUTSCHE ANLEITUNG
- ISTRUZIONI ITALIANO
- INSTRUCCIONES EN ESPAÑOL
- INSTRUCTIONS EN FRANÇAIS
- NEDERLANDSE INSTRUCTIES
- POOLSE INSTRUCTIES
- ZWEEDSE INSTRUCTIES
